博文

EW-5510-1 Semi Automatic Loose Pin Terminal Crimping Machine (0.5–4.0mm²)

图片
 Manual feeding and crimping of loose turned pin terminals or male/female plug pins is notoriously inefficient, labor-intensive, and prone to quality variations. Hand-orienting tiny individual pins, stripping conductor insulation separately, and manually twisting wire strands introduce high labor costs, inconsistent crimping depths, and operator fatigue. The EASTONTECH EW-5510-1 Semi-Automatic Loose Pin Terminal Crimping Machine integrates wire stripping, conductor twisting, automatic pin feeding, and 4-point indentation crimping into a single 2.5-second automated cycle. Built for wire cross-sections from 0.5 to 4.0 mm² , the EW-5510-1 features an integrated vibratory bowl feeder that automatically sorts and delivers loose pin terminals directly to the crimping zone. Powered by 2 imported tungsten steel rotary stripping blades and a precision 4-point crimping structure , the machine ensures 360-degree uniform compression for optimal electrical conductivity and mechanical pull-of...
发表评论
阅读全文

EW-9860 Ferrule Strip & Crimp Machine 0.3-6mm2

图片
The EW-9860 is a fully automatic, servo-driven strip-and-crimp machine for ferrules and bare ring terminals. It turns the wire-to-terminal process into one cycle — strip, twist, feed and four-point crimp — so control panel and wire harness manufacturers get consistent, gas-tight terminations on 0.3–6.0 mm² (AWG 22–10) BVR/RV stranded wires without manual handling. Key capabilities at a glance One-Cycle Automation — Strip, Twist, Feed & Crimp Complete wire processing in a single cycle: stripping → conductor twisting → vibratory bowl terminal positioning → four-point crimping, automatically triggered by the wire insertion sensor (foot pedal optional). One operator can supervise multiple machines. Broad Terminal Compatibility (0.3–6.0 mm² / AWG 22–10) Processes ring (O-type) bare terminals and ferrules from 0.3 to 6.0 mm² (AWG 22–10), with quick-change tooling that swaps between terminal profiles in minutes. 1.5-Ton Servo Crimp Quality A 1.5-ton servo drive delivers four-point crimps...
发表评论
阅读全文

EW-02A+ Fully Electrical Wire Cutting & Stripping Machine (0.1–6.0 mm² / 28–10 AWG / 4-Roller Drive)

图片
 Pneumatic wire stripping machines introduce unnecessary operational hurdles—they require expensive shop air infrastructure, suffer from pressure fluctuations, and produce loud pneumatic exhaust noise in assembly areas. Furthermore, conventional 2-roller feed mechanisms frequently slip when handling slippery or soft insulations (such as Teflon, fiberglass, and silicone), resulting in length discrepancies, surface crushing, and rejected wire leads on 0.1–6.0 mm² (28–10 AWG) conductors. The EASTONTECH EW-02A+ Automatic Wire Cutting & Stripping Machine provides a whisper-quiet, 100% electrical benchtop processing station that completely eliminates the need for an air compressor. Powered by an efficient 350 W electrical drive system , the EW-02A+ features a high-traction 4-roller drive mechanism that maintains uniform feeding pressure without damaging delicate jacket materials. Operating at impressive speeds up to 5,000 pieces per hour with a noise level below < 55 dB(A) , it...
发表评论
阅读全文